18 Years Factory Aluminium Oxide Sanding Belts - Diamond sanding belt High grinding efficiency Good durability – Fuke

Application Range 

Diamond abrasive belts are mainly used for the grinding of high-hardness thermal spray coatings on the surface of rollers and shafts, such as high-temperature alloys and special ceramics. And can be widely used in the grinding and polishing of complex shapes and surfaces of hard and brittle materials such as stone, glass, ceramics, monocrystalline silicon, polycrystalline silicon, synthetic materials, cemented carbide, aluminum alloy, etc.

Specification 

Abrasive size | 40# 5000#
Size | Width: 5mm~~350mm Length: 150mm~~5000mm

Product Display

Usage

Diamond abrasive belts are divided into three categories according to usage, tool performance, and manufacturing difficulty:

(1) Resin dispensing type abrasive belt
Resin dispensing type, its manufacturing equipment is simpler than coating type products, the equipment investment is lower, and the dispensing type can improve the shortcomings of resin coating products, because ordinary resins are more brittle and hard and have poor flexibility after curing. In addition, the dispensing type products have evenly distributed gaps in the middle, so they can perform better grinding performance when grinding hard plastic materials or during dry grinding.

(2) Resin full-coated abrasive belt
This type of abrasive belt is to uniformly coat the resin on the entire substrate surface, so that the abrasive is distributed on the entire surface of the cloth base with a certain density. This type of abrasive belt manufacturing method has manual coating type and mechanical coating type. Due to the long service life and small production scale of diamond abrasive belts, in order to reduce equipment costs, manual coating or semi-manual and semi-mechanical manufacturing processes can be adopted when there is no requirement for performance. The manual coating process cannot control the coating uniformity of abrasives and binders, and the production process is not continuous, resulting in uneven working surface thickness of the abrasive belt, uneven distribution of abrasives, and uneven orientation of abrasives, resulting in low product quality;

(3) Electroplating abrasive belt
Electroplating abrasive belt is a common type produced by domestic and foreign manufacturers, mainly due to the simple production equipment of electroplating sand belt, and the high bonding strength of the electroplating abrasive belt, the wear resistance and temperature resistance of the adhesive are higher than that of resin. However, problems such as the strength of the electroplated closed abrasive belt substrate and the strength of the substrate joint need to be further studied and resolved.

Product Advantage

01

Arbitrary Bending

Strong flexibility, good elasticity

Not easy to wrinkle

Not easy to break

Product Advantage

01

Arbitrary Bending

Strong flexibility, good elasticity

Not easy to wrinkle

Not easy to break

02

Durable and cost-effective

Although price higher than conventional belt

Due to the long life

High cost-effective than conventional belt

02

Durable and cost-effective

Although price higher than conventional belt

Due to the long life

High cost-effective than conventional belt

03

Electroplating process

Enhance the corrosion resistance of metals

Increase hardness, prevent wear

Improve smoothness, and heat resistance

03

Electroplating process

Enhance the corrosion resistance of metals

Increase hardness, prevent wear

Improve smoothness, and heat resistance

04

Good Grinding Performance
Not Easy To Burn The Workpiece